•  
  •  
All purchases are made securely using PayPal.
You can view or revise the contents of your cart at anytime using this button.
ORDERING NOT AVAILABLE AT THIS TIME

​​​​​​​
DWLR32 - $53 each  (Includes $3 Shipping* )
​​​​​​​

Remove the base from the plunge base used with the DeWalt 611 or 600b compact routers, or the Porter-Cable 450PK router and install this adapter. You can then mount and center your router on the Festool LR32 Guide Plate using the supplied M6 knobs and bore shelf pin or cup hinge holes on the 32mm standard spacing used throughout the cabinet industry for mounting hinges and spacing shelf pin holes. This adapter base allows you to rotate the router 90 degrees giving you the ability to position the router for the most comfortable operating position for each job.

MKLR32- $53 each  (Includes $3 Shipping* )


Remove the base from the Makita 196094-2 Plunge Base used with the Makita RT0701c or XTR01C routers and install this adapter. Then you can mount your router using the supplied M6 knobs on the Festool LR32 Guide Plate and bore shelf pin or cup hinge holes on the 32mm standard spacing used throughout the cabinet industry for mounting hinges and spacing shelf pin holes. This adapter base allows you to rotate the router 90 degrees giving you the ability to position the router for the most comfortable operating position for each job.
MELR32 - $53 each  (Includes $3 Shipping* )


Remove the base from the plunge base for your Milwaukee 5615 or 5616 router and install this adapter. You can then mount your router on the Festool LR32 Guide Plate using the supplied M6 knobs and bore shelf pin or cup hinge holes on the 32mm standard spacing used throughout the cabinet industry. These Milwaukee mid-size routers with the plunge base only fit on the LR32 Guide Plate in one position.
PCLR32 - $53 each  (Includes $3 Shipping* )



Remove the base from your PC 690 router and install this adapter. Then you can mount your router using the supplied M6 knobs on the Festool LR32 Guide Plate and bore shelf pin or cup hinge holes on the 32mm standard spacing used throughout the cabinet industry for mounting hinges and spacing shelf pin holes. The Porter-Cable mid-size routers only fit on the Festool LR32 Guide Plate in one position. 
PC890 - $53 each (Includes $3 Shipping)


Remove the base from your PC 890 router and install this adapter. Then you can mount your router using the supplied M6 knobs on the Festool LR32 Guide Plate and bore shelf pin or cup hinge holes on the 32mm standard spacing used throughout the cabinet industry for mounting hinges and spacing shelf pin holes. The Porter-Cable 890 series mid-size router with 8931 Plunge Base only fits on the Festool LR32 Guide Plate in one position. 

AnchorCG250- $6 each (Includes $1 Shipping* )


Mount this centering guide in your 1/4" collet to center the router on the Festool LR32 Guide Plate for perfectly aligned hole drilling. This centering guide is made specifically for centering your router on the 40mm opening in the Festool LR32 Guide Plate.
CG500- $6 each  (Includes $1 Shipping* )


This version is only for routers with 1/2" collets.
Mount this centering guide in your 1/2" collet to center the router on the Festool LR32 Guide Plate for perfectly aligned hole drilling. This centering guide is made specifically for centering your router on the 40mm opening in the Festool LR32 Guide Plate.  
DWLO- $17 each  (Includes $2 Shipping* )


This kit will disable the plunge lock on the DeWalt/Porter-Cable Plunge Base allowing the router to move freely up and down. It makes quick work of boring a series of holes. To release the plunge lockout just press down on the plunge lock lever and allow the locking pin to retract. The plunge lock function is back to work in a fraction of a second and can be just as quickly disabled again when need be. Installing the Plunge Lockout does not interfere with the dust collection attachments sold by DeWalt or Porter-Cable for this plunge base.
FTCAP - $6 each  (Includes $1 Shipping* )

Cover the end of your Festool MFT/3 Fence with this protective end cap. The face of the fence is not covered so as not to interfere with your work. Can be used with the fence flat (as shown) or vertical.

WPCAP - $6 each  (Includes $1 Shipping* )

Cover the sharp ends of your Woodpeckers Dual Purpose Track with these protective caps. Supplied in red but shown here in orange to contrast with the Dual-Purpose Track for visibility. The supplied caps are red in color and a close match to the Woodpeckers red anodizing on their Dual-Purpose Track.

Woodpeckers Dual-Purpose Track End Cap (two end caps included in kit)
image-971685-20220928_160747_(Large)-c51ce.w640.jpg



image-971688-20220930_095211_(Large)-8f14e.w640.jpg

Anchor* - Includes shipping to lower 48 US states. Items are sent via USPS as
First Class Package 
with tracking which keeps shipping as low as possible. 

If you are outside this area, please contact us so shipping can be calculated
and an invoice sent to you with the total before you make your purchase.

For my friends in Australia please contact Dave Stanton
​​​​​​​
for details on pricing and purchasing through him.